Fine surface ageing deserves inspection; deep cracks, exposed material or bulges require urgent professional attention. Cracking can result from age, UV exposure, long periods parked, chemical contamination or running underinflated.
Cracked tyre sidewalls: when to worry is easier to understand when you separate the immediate decision from the checks behind it. Fine surface ageing deserves inspection; deep cracks, exposed material or bulges require urgent professional attention.
Tyres are the vehicle’s contact with the road, so a small defect or incorrect setting can affect braking, steering and stability. The safest approach is to make this check part of a routine rather than waiting for an MOT, warning lamp or difficult journey.
Short answer: Fine surface ageing deserves inspection; deep cracks, exposed material or bulges require urgent professional attention.
What you need to know
The important detail
Cracking can result from age, UV exposure, long periods parked, chemical contamination or running underinflated.
Make the observation in good light and compare it with the same area on the other tyres.
What it means in practice
The sidewall flexes constantly and cannot be assessed by tread depth alone.
Do not let the legal minimum or absence of a warning light become the only test of condition.
What drivers often miss
Do not attempt a DIY sidewall repair or cover damage with tyre dressing.
Record anything unusual so you can explain it clearly if a professional inspection is needed.
Avoid driving on a tyre with a bulge, exposed cords or rapid pressure loss.
A sensible check, step by step
-
Work on level ground away from moving traffic.
-
Check all four tyres, not only the one that first caught your attention.
-
Repeat the check regularly and before a long journey.
Common mistakes to avoid
- Relying on a single quick glance instead of checking the whole tyre and its inner edge.
- Using a generic number or internet tip when the vehicle handbook gives a specific requirement.
- Assuming a tyre is safe because no dashboard warning is showing.
What to do next
Check the complete tyre specification and condition in good light. Write down anything that differs between the four corners of the car. If the tyre may be unsafe, avoid unnecessary driving and arrange an inspection by a competent tyre professional.
Quick questions
Can I rely on a visual check?
No. A visual check is useful for obvious damage, but pressure, tread depth and internal condition may need the correct gauge or a professional inspection.
Should I check only before an MOT?
No. Tyres change between tests. Regular checks and a check before long journeys are a better routine.
What if I am still unsure?
Treat uncertainty about damage, fitment or pressure as a reason to ask a competent tyre professional before continuing a journey.
Find local tyre help Search tyre prices →